ROHDE & SCHWARZ FSC3.13 CALIBRATION and ROHDE & SCHWARZ FSC3.13 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSC3.13 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSC3.13 (1314.3006.13)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ FSC3.13 3 GHz Spectrum Analyzer with tracking generator

The R&S FSC3.13 (1314.3006.13) 3 GHz Spectrum Analyzer, with tracking generator is a compact, cost-efficient solution that offers all essential features of a professional spectrum analyzer with Rohde & Schwarz quality. It covers a wide range of applications from simple development tasks to production, or can be used for training RF professionals. Moreover, it is ideal for applications in service or maintenance. An optional preamplifier that is available for all models increases sensitivity for measuring weak signals. It features; Noise marker for determining the noise power referenced to 1 Hz measurement bandwidth. Frequency counter with 0.1 Hz resolution. Limit line monitoring (pass/fail function) for indicating whether the DUT complies with defined limits. Modulation depth measurement of AM-modulated signals. Measurement of harmonics and total harmonic distortion. AM/FM audio demodulator (audio via built-in loudspeaker or via headphones). Location of EMC problems on printed boards using the R&S®HZ-15 near-field probe set for emission measurements from 30 MHz to 3 GHz. Channel power measurement in a definable transmission channel with predefined settings for 3GPP WCDMA, cdmaOne, CDMA2000® and LTE mobile communications standards. All functions of the R&S FSC can be controlled via the USB or LAN interface using SCPI-compatible remote-control commands. Specifications. Frequency range: 9 kHz to 3 GHz. Resolution bandwidth: 10 Hz to 3 MHz. Displayed average noise level without preamplifier, RBW = 1 Hz: < –141 dBm, typ. –146 dBm (10 MHz to 2 GHz), < –138 dBm, typ. –143 dBm (2 GHz to 3 GHz). IP3 frequency 1 GHz: typ. 15 dBm. Phase noise frequency 500 MHz: < –95 dBc (1 Hz) (30 kHz carrier offset), < –100 dBc (1 Hz) (100 kHz carrier offset), < –120 dBc (1 Hz) (1 MHz carrier offset). Detectors: sample, max/min peak, auto peak, RMS. Level measurement uncertainty: < 1 dB, typ. 0.5 dB (10 MHz < f <= 3.0 GHz). Tracking generator Output power: 0 dBm (nominal). Display: 5.7" (14.5 cm) color LCD with VGA resolution. Option. 1314.3535.02 - Preamplifier, 100 kHz to 3 GHz.



 

Standard Calibration $730.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSC3.13. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.


Please contact us for your ROHDE & SCHWARZ FSC3.13 CALIBRATION and/or ROHDE & SCHWARZ FSC3.13 3 GHz Spectrum Analyzer with tracking generator REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: